Serving the Chico area  ·  (530) 924-0344  ·  Open Mon-Sun 7am-7pm
📞 (530) 924-0344 Free Quote

Metal Roofing in Biggs, CA (95917) · Local Professionals

Chico Metal Roofing · Fast response in Biggs and the Chico area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+292Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Biggs is a small farm town where rice fields and orchards run right up to the city limits, and most of the roofs here sit on barns, sheds, and ranch homes that take a beating from 100-degree summers and wet winter storms. If you drive down Durham-Dayton Highway or past Biggs Elementary, you'll see a mix of older farmhouses and metal outbuildings that have survived decades of sun and rain.

That's why property owners in Biggs (95917) call Chico Metal Roofing. We know how fasteners back out on ag buildings after a few hot seasons, and we've replaced plenty of rusted-through panels on barns along the Midway. Our team is based in Chico and serves Biggs and the surrounding areas, so we're close enough to get out here quickly when a leak shows up.

Metal Roofing in Biggs (95917)

Biggs sits flat on the Sacramento Valley floor, which means most properties here are wide, open lots with easy access for equipment, but the ground can get soft after winter rain. We plan staging and material delivery around that, especially on farm properties where a loaded truck can sink. The bigger challenge is the sun: metal roofs on rice barns and equipment sheds expand and contract daily, and that movement works screws loose over time. We see a lot of screw replacement and re-fastening jobs on ag buildings that are otherwise solid. Drainage matters too, since a flat lot means water pools if gutters and downspouts aren't sized right.

Our team has worked on metal roofs across Butte County, from standing seam on newer homes to corrugated panels on old barns. We're a Metal Roofing Alliance member and fully insured, with general liability and workers' compensation coverage, so you're protected when we're on your property.

Our services in Biggs

How a Job Works in Biggs

Step 1: You call us at (530) 924-0344 or request a free estimate online. We schedule a time to come out to your Biggs property, inspect the roof, and talk through what you're seeing, whether it's a leak in the barn or a full replacement on the house. You get a written estimate before any work starts.

Step 2: Once you approve, we pull the necessary permits through the local building department and schedule the work. On farm properties, we coordinate around harvest and equipment schedules so we're not in the way. For tighter residential lots near downtown Biggs, we plan material drops and crew parking ahead of time.

Step 3: When the job is done, we walk the property with you, clean up every scrap and nail, and make sure you know how to reach us if anything comes up. We leave your place as clean as we found it, minus the old roof.

Pricing in Biggs depends on the job. Metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and gutter work at $9 per linear foot. Coating and painting starts at $2.50 per square foot. The final number depends on roof size, access, condition, and how urgent the work is. Call (530) 924-0344 for a free estimate and we'll give you a straight answer.

✅ Metal Roofing Alliance Member, licensed and insured for work in Biggs and nearby areas.

My barn roof near the Biggs rice fields has screws backing out. Can you fix that without replacing the whole roof?
Yes. Screw replacement and re-fastening is one of our most common jobs on ag buildings around Biggs. The daily heat swing works fasteners loose, and once they back out, water gets in. We replace the screws, check the washers, and re-seat everything so the roof is watertight again. If the panels are still solid, this saves you a full replacement.
A storm just peeled back panels on my shed in Biggs. How fast can you get out here?
Call us at (530) 924-0344. We handle storm and wind damage repair and offer free inspections for storm damage. We'll get out to Biggs as soon as we can, tarp or secure the area if needed, and give you a repair estimate.
What does a typical metal roof replacement cost for a ranch home in Biggs?
Most ranch homes in Biggs fall in the range of $9 to $10 per square foot for replacement or standing seam, depending on roof size and pitch. A 1,500-square-foot roof typically lands somewhere in the low five figures. Access, tear-off, and whether you're retrofitting over shingles all affect the final price. We give free estimates so you know before you commit.
Do I need a permit to replace my roof in Biggs?
Roofing permits are commonly required for a full replacement or re-roof, and the rules vary by jurisdiction. We recommend checking with the local building department before you start. You can find contact information on the City of Biggs website at https://www.buttecounty.net, and we're happy to help you understand what's needed as part of your estimate.
My neighbor's tree branches hang over my roof line in Biggs. What can I do about damage or debris?
If branches from a neighbor's tree are damaging your roof or dropping debris that causes leaks, talk to your neighbor first. In California, you generally have the right to trim branches that cross onto your property, but it's best to check local rules and keep it civil. If your HOA has rules about tree maintenance, review those too. We can inspect your roof for damage and document it for insurance or a conversation with your neighbor.
Are you insured for work on my Biggs property?
Yes. We are fully insured with general liability and workers' compensation coverage. That protects you and your property if anything happens on the job. We're happy to provide proof of insurance before we start.
What should I do to maintain my metal roof in Biggs between seasons?
In Biggs, the main things are checking fasteners before the rainy season and clearing debris from gutters and valleys. After summer heat, walk the roof line (or have us inspect it) for loose screws or lifted panels. Before winter, make sure downspouts drain away from the building, especially on flat lots where water pools. A quick annual inspection can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Chico

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chico

All your work handled by qualified professionals in Chico

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

292+ Verified Client Reviews in Chico

⭐⭐⭐⭐⭐ 4.9/5 · 292 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chico · Response within 24h · No commitment · ☎ (530) 924-0344

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chico ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm