Serving the Chico area  ·  (530) 924-0344  ·  Open Mon-Sun 7am-7pm
📞 (530) 924-0344 Free Quote

Metal Roofing in Magalia, CA (95954) · Local Professionals

Chico Metal Roofing · Fast response in Magalia and the Chico area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+292Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Magalia sits up on the ridge above the valley floor, and the homes here show it: steep driveways, tall pines, and a mix of rebuilt houses and older cabins that have seen snow, wind, and everything in between. If you live off Skyway or up near Magalia Reservoir, you already know that a roof here has to handle more than just rain.

That is why homeowners in 95954 call Chico Metal Roofing. We are based in Chico, we know the ridge, and we have spent years installing and repairing metal roofs on homes that were rebuilt after the Camp Fire and on the older places that survived it. When the next storm rolls in, you want a roof that is fastened right and sealed tight.

Metal Roofing in Magalia (95954)

Magalia is not a flat subdivision. Lots are often sloped, some are heavily wooded, and access can be tight for trucks and materials. That means we plan every job around the grade, the trees, and the driveway. A lot of the homes here are on pier and beam or have crawl spaces, so we pay attention to ventilation and how the roof ties into the walls. Snow at this elevation is real, and ice damming at the eaves is a common call. We install snow guards and ice protection because we have seen what happens when snow slides off a metal roof and lands on a walkway or a parked car. We also deal with pine needles and debris that collect in valleys and behind chimneys, which can trap moisture and lead to rust or leaks if not addressed.

Our team has worked on everything from small cabins to larger custom homes up and down the ridge. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we treat every Magalia property like it is our own. Whether you need a full replacement, a repair after a windstorm, or a coating to extend the life of an existing roof, we can help.

Our services in Magalia

How a Job Works in Magalia

Step 1: You call us at (530) 924-0344 or fill out our contact form. We schedule a free on-site assessment at a time that works for you. We will walk the roof, check the flashing, fasteners, and panels, and talk through what we find. You get a written estimate with options, no pressure.

Step 2: Once you approve, we pull the permits through Butte County and schedule the work. In Magalia, that often means coordinating with the county and sometimes with your HOA if you are in a planned development. We handle the paperwork and keep you posted on timing. On the day of the job, our crew arrives with the materials and gets to work. We protect your landscaping and keep the site as tidy as possible while we are there.

Step 3: When the job is done, we do a full cleanup, including magnet sweeps for nails and a final walkthrough with you. We make sure you know how the new roof works, what to watch for, and how to reach us if you have questions later. We leave your property clean and your roof ready for the next season.

Pricing in Magalia depends on the size and pitch of your roof, the material you choose, and how accessible the site is. For a basic corrugated or ribbed panel roof, you are looking at around $5.50 per square foot. Standing seam starts around $10 per square foot, and stone-coated steel is in the $9 per square foot range. If you are doing a retrofit over existing shingles, that can start around $7 per square foot. Repairs are often in the $450 range for a leak or a small fix, and screw replacement or re-fastening starts around $750. Snow guards and ice protection start around $1,200. Every roof is different, so we give you a firm quote after we see it. Call (530) 924-0344 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Magalia and nearby areas.

Do you work on homes in the Magalia ridge area that were rebuilt after the Camp Fire?
Yes, we do. We have worked on many rebuilt homes in Magalia and Paradise. Those homes often have newer construction, but we still check the details: how the roof ties into the walls, whether the flashing was done correctly, and if the ventilation meets current code. We can also help you choose a Class A metal roof if you are rebuilding or replacing.
What should I do if a storm knocks a tree limb onto my metal roof in Magalia?
First, make sure everyone is safe and stay off the roof. Call us at (530) 924-0344. We offer free inspections for storm and wind damage. We will come out, assess the damage, and give you a written estimate for the repair. If it is an emergency, we can often tarp or secure the area the same day to prevent further damage.
How much does a metal roof replacement cost in Magalia?
It depends on the size and complexity of your roof, the material, and access. As a ballpark, metal roof replacement starts around $9 per square foot, and standing seam starts around $10 per square foot. Stone-coated steel is also around $9 per square foot. We give free estimates so you know exactly what your roof will cost before we start.
Do I need a permit for a metal roof in Magalia?
In most cases, yes. Butte County requires permits for roof replacements and some repairs. The rules and fees vary, so it is best to check with the county. You can start at the City of Magalia website (https://www.buttecounty.net) for general information, but we recommend calling the building department directly to confirm what your project needs. We handle the permit process for you as part of the job.
My neighbor's tree hangs over my roof. Can I trim it, and do I need HOA approval for a metal roof?
In California, you generally have the right to trim branches that overhang your property line, but it is best to talk with your neighbor first and stay within the law. For HOA approval, many subdivisions in Magalia have design review for roof color and profile. We can provide material samples and documentation to help with your HOA submittal.
Are you insured for work on my Magalia property?
Yes. We carry general liability insurance and workers' compensation for our crew. We are happy to provide a certificate of insurance before we start work. You can have peace of mind knowing that if something happens on the job, you are protected.
How often should I have my metal roof inspected in Magalia?
We recommend an inspection every two to three years, and after any major storm. Magalia gets snow, wind, and pine needles, which can cause problems over time. A quick inspection can catch loose fasteners, damaged seals, or debris buildup before it turns into a leak. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Chico

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chico

All your work handled by qualified professionals in Chico

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

292+ Verified Client Reviews in Chico

⭐⭐⭐⭐⭐ 4.9/5 · 292 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chico · Response within 24h · No commitment · ☎ (530) 924-0344

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chico ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm