Serving the Chico area  ·  (530) 924-0344  ·  Open Mon-Sun 7am-7pm
📞 (530) 924-0344 Free Quote

Metal Roofing in Palermo, CA (95968) · Local Professionals

Chico Metal Roofing · Fast response in Palermo and the Chico area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+292Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Palermo sits just south of Chico along Highway 149, a small town where rural lots, older ranch homes, and a steady mix of farm and residential properties define the landscape. Many houses here date back decades, and the flat valley floor means summer sun hits hard and winter storms roll in without much to break the wind.

Homeowners in Palermo (95968) call Chico Metal Roofing because we understand the local housing stock, from aging shingle roofs on older ranches to barns and shops that need durable metal. We are based in Chico and serve Palermo and the surrounding areas, and we are a Metal Roofing Alliance member with fully insured crews.

Metal Roofing in Palermo (95968)

Palermo is mostly flat valley ground, but that doesn't make roofing simple. Lots are often large with a mix of mature trees, gravel drives, and outbuildings, and access can be tight for equipment. The soil is heavy in places, and winter rain can pool near foundations if gutters and drainage aren't handled right. Many homes here are older, with shingle roofs that are reaching the end of their life, and some have multiple layers that need to be addressed before a new metal roof goes on. The summer heat is intense, often over 100 degrees, which makes reflective metal roofing a smart choice for cutting cooling costs. We also see wind-driven rain and occasional debris from nearby orchards and fields, so fasteners and flashing need to be installed correctly to prevent leaks.

Our team has worked on homes and agricultural buildings throughout Butte County, including Palermo, and we know the local building department's requirements. We handle everything from corrugated panel roofs on shops to standing seam on residences, and we are fully insured with general liability and workers' compensation.

Our services in Palermo

How a Job Works in Palermo

Step 1: You call us at (530) 924-0344 or request a free estimate online. We schedule an on-site assessment at your Palermo property, where we inspect the existing roof, check for leaks, and discuss your options. We'll measure the roof, look at access, and talk through metal roofing styles, colors, and any permit requirements with Butte County. You'll get a clear written estimate before any work begins.

Step 2: Once you approve, we pull the necessary permits and schedule the work. Our crews are experienced with the tight access and older structures common in Palermo, and we take care to protect your landscaping and outbuildings. For retrofits over existing shingles, we verify that the existing layers meet code limits. We keep you informed on progress and coordinate with you on any HOA or historic considerations if they apply.

Step 3: After installation, we clean the site thoroughly, haul away all debris, and do a final walkthrough with you. We make sure you're satisfied with the work and understand how to care for your new metal roof. We don't leave until your property is clean and the job is done right.

Pricing for metal roofing in Palermo depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you're considering a retrofit over existing shingles, that starts at $7 per square foot. Corrugated and ribbed panel roofing starts at $5.50, and metal shingle or stone-coated steel at $9. For repairs, we start at $450 for general fixes or leak repair, and screw replacement and re-fastening starts at $750. Coating and painting starts at $2.50 per square foot. These are starting prices, and we'll give you an exact quote after inspecting your roof. Call (530) 924-0344 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Palermo and nearby areas.

My Palermo ranch home has two layers of old shingles. Can you install a metal roof over them?
In many cases, yes. California code limits the number of existing layers, so we'll inspect your roof to confirm. If it's a go, we'll use a retrofit system that saves you the cost of tear-off and disposal. We'll also check the decking and flashing to make sure the new roof performs well.
A storm just blew through Palermo and lifted some panels on my barn. How fast can you respond?
We prioritize storm damage calls in Palermo and the surrounding area. Call us at (530) 924-0344, and we'll schedule an inspection as soon as possible, often within a day or two. We'll secure the roof to prevent further damage and provide a repair estimate.
What's the typical cost for a metal roof on a 1,500-square-foot home in Palermo?
For a basic corrugated panel roof, you might start around $8,000 to $12,000, depending on pitch, access, and trim. Standing seam would be higher, starting around $15,000. These are rough ranges; we'll give you a precise quote after a free on-site assessment. Call (530) 924-0344 to schedule.
Do I need a permit for a metal roof in Palermo, and how do I get one?
Yes, roofing permits are typically required for replacements and some repairs. The rules and fees are set by Butte County, and you can find contact information on the City of Palermo website at https://www.buttecounty.net. We handle the permit application and inspections for you as part of our service.
My neighbor's tree branches hang over my property line and scrape my roof. What can I do?
In California, you generally have the right to trim branches that cross onto your property, but it's best to talk with your neighbor first. If the tree is on their land, you can trim to the property line without harming the tree. For HOA communities in Palermo, check your CC&Rs for any additional rules. We can advise on roof protection and repairs if branches have caused damage.
Are your crews covered by insurance while working on my Palermo property?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you and your property in case of an accident. We're happy to provide a certificate of insurance upon request.
What maintenance does a metal roof need in Palermo's climate?
Metal roofs are low maintenance, but in Palermo's hot summers and wet winters, we recommend an annual inspection to check fasteners, seals, and flashing. Remove debris from valleys and gutters, especially after fall winds. If you see loose screws or lifted panels, call us for a quick repair to prevent leaks.
Why choose us?

Trusted professionals in Chico

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chico

All your work handled by qualified professionals in Chico

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

292+ Verified Client Reviews in Chico

⭐⭐⭐⭐⭐ 4.9/5 · 292 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chico · Response within 24h · No commitment · ☎ (530) 924-0344

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chico ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm