Serving the Chico area  ·  (530) 924-0344  ·  Open Mon-Sun 7am-7pm
📞 (530) 924-0344 Free Quote

Metal Roofing in Gridley, CA (95948) · Local Professionals

Chico Metal Roofing · Fast response in Gridley and the Chico area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+292Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Gridley is farm country, and the roofs here show it. From the rice fields and almond orchards off Highway 99 to the older homes near the Gridley fairgrounds, this town runs on agriculture and the buildings that support it. Barns, equipment sheds, and farmhouses take a beating from summer heat and winter storms, and more homeowners are switching to metal for good reason.

If you own a home or manage property in Gridley (95948), you know that a roof has to handle scorching summers and wet winters without constant repairs. We are Chico Metal Roofing, and we have been helping folks across Butte County, from Gridley to Chico, get roofs that last. When the wind kicks up across the valley or a leak shows up over the kitchen, our team is just a call away.

Metal Roofing in Gridley (95948)

Gridley sits on the Sacramento Valley floor, and that means flat lots, tight spacing between some homes, and a lot of agricultural buildings mixed in with residential streets. Older farmhouses and barns often have roofs that have been patched for decades, and when we install metal, we pay attention to the little things: how water drains off a low-slope shed, how fasteners hold up when the north wind blows, and how to work around trees and power lines without tearing up your yard. The heat here is brutal in July and August, and metal reflects that sun instead of soaking it up, which can help keep the house cooler.

Our team has worked on everything from corrugated panel roofs on equipment sheds to standing seam on newer homes. We know the local building department and what it takes to get a roof permitted and inspected. If you are in Gridley and need a roof that can handle the valley climate, we are ready to help.

Our services in Gridley

How a Job Works in Gridley

Step 1: Give us a call at (530) 924-0344 or fill out our contact form. We will set up a free on-site assessment at your property in Gridley. We will look at your current roof, take measurements, and talk through your options, whether it is a repair, a replacement, or a new installation. You will get a written estimate before any work begins.

Step 2: Once you approve the estimate, we schedule the work. For many jobs in Gridley, that means coordinating with the local building department for permits. We handle the paperwork and make sure the job meets code. On the day of installation, our crew arrives with materials and gets to work, keeping the site as tidy as possible. If your property has a tight driveway or a lot of farm equipment around, we will plan ahead so there are no surprises.

Step 3: When the work is done, we walk the property with you. We clean up all debris, haul away old materials, and make sure you are satisfied with the finished roof. We do not leave until you have had a chance to ask questions and see the results.

Pricing for metal roofing in Gridley depends on the size of your roof, the material you choose, and how complex the job is. For a basic corrugated panel roof, you might see prices starting around $5.50 per square foot. Standing seam runs a bit more, from about $10 per square foot, and metal shingles or stone-coated steel start around $9. If you are replacing an old roof, that typically starts around $9 per square foot, and installing metal over existing shingles (a retrofit) can start at $7 per square foot. Smaller repairs, like fixing a leak or replacing screws, start at $450. We always provide a free estimate so you know exactly what to expect. Call us at (530) 924-0344 to schedule yours.

✅ Metal Roofing Alliance Member, licensed and insured for work in Gridley and nearby areas.

My barn off Gridley's rice fields has a rusted corrugated roof. Can you replace it without disrupting the farm?
Yes. We work with agricultural properties regularly and understand that you cannot afford downtime during harvest or planting. We can schedule the replacement around your operations and use corrugated or ribbed panel roofing that stands up to dust, heat, and moisture. We will also check the structure to make sure it can support the new metal.
A storm just blew some panels loose on my house near the Gridley fairgrounds. How fast can you get out?
We offer free inspections for storm damage and can usually get to you within a day or two, depending on the season. Call us at (530) 924-0344 and we will assess the damage, secure the roof if needed, and give you a repair estimate. We work with your insurance company if you are filing a claim.
What is the typical cost to replace a roof on a 1,500-square-foot home in Gridley?
For a standard replacement with corrugated panel roofing, you might be looking at around $5.50 to $8 per square foot, so roughly $8,000 to $12,000 depending on the pitch and complexity. Standing seam or stone-coated steel will be higher. We recommend a free estimate so we can give you an accurate number based on your specific roof.
Do I need a permit from the city of Gridley to replace my roof?
Most roofing replacements require a permit, and the rules can vary. We recommend checking with the City of Gridley or Butte County building department to confirm requirements. You can find contact information on the City of Gridley website. We handle the permitting process for you and make sure the work meets local codes.
My neighbor's tree branches hang over my property line. Can I trim them to install a metal roof?
In California, you generally have the right to trim branches that overhang your property, but it is best to talk with your neighbor first. If the tree is on their property, you may need their permission. We can help you plan the installation around existing trees and avoid conflicts.
Are you insured for work on my Gridley property?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance upon request.
How often should I inspect my metal roof in Gridley?
We recommend an annual inspection, especially after winter storms or before summer heat. Check for loose fasteners, debris buildup, and signs of rust. A quick inspection can catch small issues before they become leaks. We offer free estimates for inspections and can perform any needed maintenance.
Why choose us?

Trusted professionals in Chico

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chico

All your work handled by qualified professionals in Chico

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

292+ Verified Client Reviews in Chico

⭐⭐⭐⭐⭐ 4.9/5 · 292 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chico · Response within 24h · No commitment · ☎ (530) 924-0344

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chico ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm