Serving the Chico area  ·  (530) 924-0344  ·  Open Mon-Sun 7am-7pm
📞 (530) 924-0344 Free Quote

Metal Roofing in Chico, CA (95928) · Local Professionals

Chico Metal Roofing · Fast response in Chico and the Chico area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+292Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Chico is a city of distinct neighborhoods, from the Victorian and Queen Anne homes near Bidwell Mansion and South Campus to the Craftsman bungalows in the Avenues and Barber neighborhood, and the post-war ranches across Chapmantown. The housing stock here spans 150 years, and the valley floor climate, with scorching summers over 100 degrees and wet winter storms, decides how long a roof lasts.

Homeowners in Chico (95928) call Chico Metal Roofing because we understand the local challenges: fire risk in the wildland-urban interface, triple-digit heat that bakes asphalt shingles, and winter rains that find every flashing gap. We are based here, we know the neighborhoods, and we install metal roofs that stand up to Butte County weather.

Metal Roofing in Chico (95928)

Chico sits on the Sacramento Valley floor below the Sierra Nevada foothills, with valley oaks and sycamores along Big Chico Creek and orchards stretching out toward the rice fields. The terrain is mostly flat, but older neighborhoods like South Campus and the Avenues have mature trees that drop limbs and fill gutters, while homes on the east side and in Canyon Oaks face higher fire risk. The soil here is often clay-heavy, which can affect drainage around your foundation, and proper roof runoff management is key. We also see many homes in Paradise and Magalia rebuilt after the 2018 Camp Fire, and those rebuilds often require Class A metal roofs for fire resistance. Our team is experienced with the local building stock, from 1870s Victorians to 1990s two-story homes in north Chico.

We have been serving Chico and the surrounding areas for years, and we are a Metal Roofing Alliance member. Our crews are fully insured and trained to handle everything from standing seam installations on historic homes to coating and painting existing metal roofs.

Our services in Chico

How a Job Works in Chico

Step 1: You call us at (530) 924-0344 or request a free estimate online. We schedule an on-site assessment at your convenience, where we inspect your current roof, discuss your options, and provide a detailed written estimate. We will also check for any permit requirements with the City of Chico.

Step 2: Once you approve the estimate, we order materials and schedule the work. In Chico, permit timing can vary, especially for historic districts or HOA communities, so we handle the paperwork and coordinate inspections. Our crews are careful with tight lot access in older neighborhoods and protect your landscaping. For fire rebuilds in Paradise and Magalia, we understand the additional documentation needed for insurance and compliance.

Step 3: After installation, we clean up thoroughly, walk the property with you to ensure everything meets your satisfaction, and provide a final inspection. We leave your home clean and your new metal roof ready to protect you for decades.

Metal roofing in Chico is priced by the square foot, and typical costs range from $5.50 per square foot for corrugated panel roofing to $20 per square foot for copper and specialty metals. Standing seam metal roofing starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. For repairs, metal roof leak repair starts at $450, and screw replacement and re-fastening starts at $750. The final cost depends on the size of your roof, access, the condition of the existing structure, and the urgency of the work. We offer free estimates, so call us at (530) 924-0344 to get a precise quote for your Chico home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Chico and nearby areas.

Do I need a permit to install a metal roof in Chico?
Yes, roofing permits are commonly required for a full replacement or re-roof in Chico, and requirements vary by jurisdiction. We recommend checking with the City of Chico's building department to confirm the rules for your property. We handle the permit process for you, including submitting plans and scheduling inspections.
How quickly can you respond to storm damage in Chico?
We offer free inspections for storm and wind damage and prioritize emergency repairs. Call us at (530) 924-0344, and we will schedule an assessment as soon as possible, often within 24 to 48 hours after a major storm. We can tarp or temporarily secure your roof to prevent further damage.
What is the typical cost for a metal roof on a 1,500-square-foot home in Chico?
For a 1,500-square-foot home, a basic corrugated metal roof might start around $8,250 (at $5.50 per square foot), while a standing seam roof could start around $15,000 (at $10 per square foot). These are ballpark figures; the actual price depends on roof complexity, pitch, and material choice. Call (530) 924-0344 for a free estimate.
Are there historic district restrictions for metal roofs in Chico?
Some neighborhoods, like the South Campus area near Bidwell Mansion, may have historic design review that restricts panel profiles and colors. We can help you navigate the approval process with the City of Chico and suggest metal roofing options that meet historic guidelines while providing modern durability.
What should I do if my neighbor's tree overhangs my roof and causes damage?
In California, you generally have the right to trim branches that overhang your property line, but it's best to discuss with your neighbor first. If a limb falls and damages your roof, your homeowner's insurance may cover repairs. We can inspect and repair any damage, and we also offer preventive maintenance like gutter guards to reduce future issues.
Is your team covered by insurance for work on my Chico property?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in the unlikely event of an accident during the project. We can provide a certificate of insurance upon request.
How often should I have my metal roof inspected in Chico?
We recommend an inspection every two to three years, especially after major storms or if you live near mature trees. Chico's hot summers and winter rains can loosen fasteners and degrade sealants over time. Regular inspections catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Chico

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chico

All your work handled by qualified professionals in Chico

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

292+ Verified Client Reviews in Chico

⭐⭐⭐⭐⭐ 4.9/5 · 292 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chico · Response within 24h · No commitment · ☎ (530) 924-0344

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chico ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm