Serving the Chico area  ·  (530) 924-0344  ·  Open Mon-Sun 7am-7pm
📞 (530) 924-0344 Free Quote

Metal Roofing in Yuba City, CA (95991) · Local Professionals

Chico Metal Roofing · Fast response in Yuba City and the Chico area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+292Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Yuba City is a farming town at heart, with almond orchards and walnut groves running right up to the city limits and a grid of mid-century ranch homes and older Victorians near the Feather River. The lots are wide, the sun is relentless from May through September, and the winter rain comes hard off the Sutter Buttes. Metal roofing makes sense here, and we install it across 95991.

Homeowners in Yuba City call us because we know the difference between a roof that survives a 105-degree summer and one that bakes, cracks, and leaks by the third year. We are based in Chico, just up Highway 99, and we handle everything from a single leak repair to a full standing seam replacement on a commercial shop or a barn out on Township Road.

Metal Roofing in Yuba City (95991)

Yuba City sits on flat valley ground, but that does not make roofing simple. The soil here is heavy clay in places, which means proper drainage away from the foundation matters as much as the roof itself. Older homes near the Feather River and downtown have narrow side yards and mature valley oaks that drop limbs and fill gutters. Out toward the orchards, barns and equipment sheds need panels that handle dust, heat, and the occasional tractor bump. We size fasteners and flashing for the actual wind and rain loads we see here, not a generic spec sheet.

Our team has worked on everything from 1920s bungalows off Plumas Street to newer two-story homes in the north end. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we know how to work around the almond harvest schedule when a farm building needs attention.

Our services in Yuba City

How a Job Works in Yuba City

Step 1: You call (530) 924-0344 or request a free estimate online. We schedule an on-site assessment, usually within a few days. We walk the roof, check the attic if accessible, look at flashing, fasteners, and drainage, and talk through options and budget. You get a written estimate before any work starts.

Step 2: Once you approve, we pull the required permits through the local building department and schedule the crew. On tight lots near downtown, we stage materials in the driveway or on the street per city rules. For HOA properties, we coordinate color and profile approval before ordering panels. Most residential re-roofs take two to five days depending on size and weather.

Step 3: We clean up every day and do a final walkthrough with you. Magnets sweep the yard for nails, gutters get checked, and we make sure you know how to reach us if anything comes up after we leave.

Pricing in Yuba City depends on the job. Metal roof installation starts around $8 per square foot, standing seam around $10, and replacement around $9. If you are going over existing shingles, retrofit starts near $7 per square foot, but code limits how many layers you can cover, so we check that first. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and coatings start at $2.50 per square foot. Larger commercial and agricultural buildings are quoted per project. Factors that move the number: roof size and pitch, access, how much old material has to come off, and whether there is storm damage. Call (530) 924-0344 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Yuba City and nearby areas.

My Yuba City ranch home has a low-pitch roof. Can metal panels work on it?
Yes, but the panel profile matters. Low-slope roofs need a standing seam or a specific ribbed panel with the right seam height and underlayment. We check your pitch during the free assessment and recommend a panel that sheds water properly, especially during those heavy winter storms.
A storm just peeled back panels on my barn off Highway 99. How fast can you get out?
We prioritize storm and wind damage calls. Call (530) 924-0344 and we will schedule an inspection, often same or next day depending on crew availability. We can tarp or secure the area to prevent further damage and then give you a repair estimate.
What does a typical metal roof replacement cost for a 1,500-square-foot home in 95991?
Most homes that size land between $12,000 and $18,000 for a full replacement, depending on panel type, pitch, and how much old roofing has to be removed. Standing seam runs higher than corrugated. We give you a firm number after seeing the roof, not a phone guess.
Do I need a permit for a metal roof in Yuba City?
Yes, a full replacement or re-roof typically requires a permit, and the rules vary by jurisdiction. Check with the City of Yuba City website for current requirements, or we can handle the permit process for you as part of the job. We always confirm with the local building department before work starts.
My neighbor says my new metal roof will send water onto their property. What are the rules?
Roof drainage has to stay on your property or follow an approved drainage plan. We design gutters and downspouts to direct water away from the property line. If you are in an HOA, we also help you get color and profile approval before installation so there are no surprises.
Are you insured for work on my Yuba City property?
Yes. We carry general liability and workers' compensation insurance. We are happy to provide a certificate of insurance before we start, so you know your property and our crew are covered.
What maintenance does a metal roof need in Yuba City's heat and dust?
Once a year, rinse off the panels and check that gutters are clear, especially before the rainy season. In orchard areas, dust and leaves build up faster. We also recommend a professional inspection every few years to check fasteners and seals, which is free as an estimate.
Why choose us?

Trusted professionals in Chico

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chico

All your work handled by qualified professionals in Chico

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

292+ Verified Client Reviews in Chico

⭐⭐⭐⭐⭐ 4.9/5 · 292 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chico · Response within 24h · No commitment · ☎ (530) 924-0344

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chico ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm