Serving the Chico area  ·  (530) 924-0344  ·  Open Mon-Sun 7am-7pm
📞 (530) 924-0344 Free Quote

Metal Roofing in Cohasset, CA (95973) · Local Professionals

Chico Metal Roofing · Fast response in Cohasset and the Chico area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+292Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Cohasset is ridge country, where homes sit up among the pines and oaks off Cohasset Road, northeast of Chico. The lots are bigger and steeper than down in the valley, and many houses here are custom builds or older ranch places that have to handle snow at elevation and fire weather in the fall. If you live up here, you already know the roof takes a beating.

Homeowners in Cohasset (95973) call us because we understand what happens to metal roofs on these ridges. We are a Chico-based crew, we know the drive up Cohasset Road, and we have seen how north winds and winter storms work on these hillsides. We are a Metal Roofing Alliance member and fully insured, and we handle everything from a single leak to a full standing seam install.

Metal Roofing in Cohasset (95973)

Cohasset is not a flat subdivision. Properties climb the ridges off Cohasset Road, with driveways that can be steep and narrow, and homes that sit on graded pads with retaining walls and drainage swales. Snow at elevation means ice damming at the eaves is a real concern, and the fall north winds that push fire weather through Butte County can lift panels and stress fasteners. We see a lot of older ranch homes and cabins with failing screw gaskets, separated seams, and flashing gaps around chimneys and skylights. Access matters here: we plan material delivery and staging around your driveway and slope, and we use fall protection and careful staging on steep lots. For high-elevation homes, we recommend snow guards and ice protection so meltwater does not back up under the panels.

Our team has worked across Chico and the surrounding foothills, including rebuilds and retrofits after recent fire seasons. We know the difference between a valley roof and a ridge roof, and we quote accordingly.

Our services in Cohasset

How a Job Works in Cohasset

Step 1: You call (530) 924-0344 or request a free estimate. We schedule an on-site assessment, and we come up to Cohasset to look at your roof, your attic if accessible, and the site conditions. We check for active leaks, fastener failure, seam separation, and flashing issues, and we talk through options and ballpark pricing before any work begins.

Step 2: Once you approve the scope, we handle the work. On steep or tight lots, we plan staging and delivery carefully. If your project needs a permit, we point you to the Butte County building department through the City of Cohasset website so you can verify current requirements. For HOA or historic review, we help with product profiles and colors that meet the rules. We protect landscaping and walkways, and we keep the site organized.

Step 3: We clean up daily and do a final walkthrough with you. Magnets sweep for screws and metal scraps, gutters and downspouts are checked, and we make sure you know what was done and what to watch for. We leave your property clean.

Pricing in Cohasset depends on roof size, pitch, access, and condition. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts around $7 per square foot, and metal roof installation starts around $8 per square foot. Standing seam starts around $10 per square foot, and stone-coated steel or metal shingle starts around $9 per square foot. Repairs and leak repairs start around $450, screw replacement and re-fastening starts around $750, and flashing, chimney, or skylight repair starts around $600. Snow guards and ice protection start around $1,200. Steep driveways, tall two-story access, and winter scheduling can affect the final number. Call (530) 924-0344 for a free estimate specific to your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Cohasset and nearby areas.

My Cohasset home sits at elevation and gets snow. Do I really need snow guards on a metal roof?
Yes, we recommend them on most ridge homes here. Snow and ice can slide off a metal roof in sheets, and without guards you risk damage to gutters, landscaping, and anything below, plus ice damming at the eaves. We install snow guards and ice protection sized to your roof and snowfall. It is a small add-on compared to repairing a crushed gutter or a wet wall.
A storm just peeled back panels on my roof off Cohasset Road. Can you respond quickly?
Call us at (530) 924-0344. We handle storm and wind damage repair and offer a free inspection. We will come out, secure the roof if needed, document the damage for your insurance claim, and give you a repair or replacement estimate. We do not promise coverage, but we provide the documentation your adjuster needs.
What does a typical metal roof replacement cost for a Cohasset ranch home?
For a typical single-story ranch home up here, a full metal roof replacement often lands in the range of $9 to $14 per square foot installed, depending on panel type, roof complexity, and access. A retrofit over existing shingles can be lower, starting around $7 per square foot. Steep driveways and two-story sections add labor. We give you a written estimate after a free on-site look.
Do I need a permit for a metal roof in Cohasset, and who do I contact?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds vary by jurisdiction. We recommend verifying current rules with Butte County before work starts. You can start at the City of Cohasset website, and we are happy to help you understand what your project will need. We do not pull permits for you, but we coordinate our schedule around inspections.
My neighbor says my new metal roof panels cross the property line. What should I do?
Property line issues are common on larger, irregular lots in Cohasset. Before installation, we walk the roofline and note setbacks. If there is any question, we recommend a survey. For HOA communities, we help you submit the panel profile and color for approval before ordering materials. We will not install over a known dispute without your written direction.
Are you insured for work on my Cohasset property?
Yes. We are fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before work begins so you have it for your records.
What maintenance should I do each year on a metal roof in Cohasset?
Focus on the fall and spring. Clear pine needles and debris from valleys and gutters, check fasteners and gaskets for wear, and look for any lifted panels or loose flashing after north wind events. If you have snow guards, make sure they are tight. A yearly inspection catches small issues before they become leaks. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals in Chico

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Chico

All your work handled by qualified professionals in Chico

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

292+ Verified Client Reviews in Chico

⭐⭐⭐⭐⭐ 4.9/5 · 292 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Chico · Response within 24h · No commitment · ☎ (530) 924-0344

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Chico ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm